北京pk彩票官网下载安装
Hotline:0571-64116601
Chinese | ENGLISH
PRODUCTS

Note TGD steel tape bucket elevator

  • TGD package rubber roller

  • TGD steel tape

  • Chuck TGD tape

  • TGD head

  • TGD tail (New)

details

1.N-TGD use

1.1 N-TGD wire tape bucket elevator (hereinafter referred to TGD) has a transmission capacity, small size, low power consumption, stable and reliable, long life, high lift and other characteristics.

1.2 machine is suitable for dry bulk powder material or a small vertical conveying granular materials.

1.3 are widely used in cement, chemicals, coal, electricity, ports, food and other industries delivery systems. Especially recommended for the kiln kiln feed conveying cement production lines, large-scale raw meal silo, cement silo storage material handling systems and large milling material closed loop delivery of high load, completely replace similar imported equipment.

1.4 Maximum transport capacity has been developed 941m3 / h, the maximum transport height of 130m.

2.N-TGD Features

2.1 lifting height up to 130m;

2.2 transport capacity of more than 941m3 / h;

2.3 Material temperature up to 120 ℃;

2.4 hopper between closely spaced, continuous extraction and unloading materials;

2.5 with material level controller and the formation of closed operations and pre-delivery equipment;

2.6 continuous operation, less maintenance;

2.7 drum design with automatic centering device, use plastic bag design, long life drum, friction force;

2.8 vertical axis reducer and hydraulic coupling, compact transmission structure, to achieve flexible drive. For large ultra-high hoist, with a slow start means;

2.9 automatic balancing tensioning device, automatic tensioning;

3. N-TGD transmission capacity

Bucket width(mm)

250

315

400

500

630

800

1000

1250

Hopper volume(L)

5

6.9

14.6

18

29

37

58

73

Throughput m3/h

φ=100%

85

117

225

280

450

570

950

1255

φ=75

63

88

168

210

338

428

712

941

Lifting height (m)

>80

>80

>100

>100

>130

>130

>130

>130

Description: (1) in the table hopper volume of water storage volume, φ for the material filling rate.

                    (2) lift height means lifting the nose, tail shaft center distance.

4. Structure Overview

This series hoist mainly by the driving portion of the head, standard section, non-festival, with doors section, tail, pulling pieces, hoppers, connection box, connecting plate, level meter and other components. The platform can be configured according to the design requirements or users. The machine is equipped with level meter, speed switch, deviation switches and other safety devices as conventional configuration.

4.1 drive section - This section consists of motor, hydraulic coupling, reducer part machine, backstop and drive bracket and so on. Selection of a single height exceeding 45m or particularly important for the production workshop, or use the hoist when the large size, the general recommendations of auxiliary drive system for low maintenance or installation.

4.2 Head - The head part by the cabinet, the spindle, the main drive roller and the bearing and other components.

Section 4.3 standard, nonstandard Festival - standard and non-standard section and the support section from the protective effect.

Section 4.4 with doors - with a large hole on the door with the door section, whereby the traction member and hopper are loaded, and offers easy access for routine maintenance and overhaul.

4.5 connection box, board - stabilizing dual-channel middle section and strengthen the body vertical stiffness.

4.6 Tail - the tail support the entire weight of the hoist, including a driven roller housing with heavy boxes, level meter.

4.7 level meter - level meter is installed in the rear, it has been opened shipped mounting holes, before commissioning site installation.

4.8 deviation switch - deviation switch installed in the head and tail about two end faces, when the tape deviation exceeds the limit, the switch sends a signal, first turn off the hoist pre-feeding equipment, empty hopper to be lifted after the stop, check Belt deviation reason, be excluded.

4.9 traction member and hopper - This section is composed of a hopper, bolts, washers and plastic components.

1438574368844498.jpg

北京pk彩票官网下载安装